HUC6801
+
D
Installation and Operation Manual
25
Copyright © 2010, Harris Corporation
3
If you selected
Custom
for the
Audio Demux Source
parameter, you can select up to four
channel pairs from the combination of detected audio groups. To select channel pairs, make
the following selections:
Selecting and Configuring Output Audio
The following sections describe how to select and configure settings for the audio groups/
pairs you want to embed in the SDI output.
Selecting Output Audio Groups/Pairs
To select the audio groups/pairs that you want to embed, make the following selections:
Bypassing Source Audio
If you are embedding compressed audio channel pairs, you can set the
Audio Master
Bypass
parameter so that these audio sources bypass the module’s audio processors and
audio synchronizer. The HUC6801
+
D can detect automatically, by means of the channel
status bit (C-bit), the presence of non-PCM audio signals such as Dolby
®
E. Upon detection
of non-PCM data in “Auto” mode, the audio synchronizer and processor blocks are
bypassed in order to maintain the integrity of the audio stream. To set the audio bypass
parameters, make the following selections:
Setting Description
Parameter Navigation
Select your Custom Audio Pair 1
to Audio Pair 4 to demux.
Audio Setup
Input
Audio Pair 1 Select to
Audio Pair Select 4
[
2
,
3
to
2
,
6
]
(select a Grp/Pr)
Setting Description
Parameter Navigation
Select the audio group in which you
want to embed audio channel Pair 1
and Pair 2.
Audio Setup
Output
Audio Pair 1 & Pair 2
Output Group [
3
,
1
]
(select a Group)
Select the audio group in which you
want to embed audio channel Pair 3
and Pair 4.
Audio Pair 3 & Pair 4
Output Group [
3
,
2
]
(select a Group)
Setting Description
Parameter Navigation
Enable Audio Bypass.
Audio Setup
Processing Audio Master Bypass
[
3
,
3
]
Auto
On
If you selected
On
for the
Audio
Bypass
parameter, you can
select the audio pairs you want
bypassed.
Audio Pair Bypass 1 to
Audio Pair Bypass 4
[
3
,
4
to
3
,
7
]
On
Off
Display the bypass status of the
audio channel pairs. Bypassed
channels are indicated by a “
b
”.
Audio Bypass Feedback
[
4
,
C
]
(displayed
feedback)
Summary of Contents for Selenio 6800 HUC6801+D
