Imagine Selenio 6800 HUC6801+D, Installation And Operation Manual

Page: 28 / 62

Chapter 3
Configuration and Operation
16
Copyright © 2010, Harris Corporation
Selecting Video Input and Output Standards
To select video input and output standards and configure your loss of video settings, make
the following selections:
Bypass Mode When an HD-SDI signal is input to the HUC6801
+
D, the module detects that no
upconversion processing on the input is required. Therefore, the module operates in Bypass
mode, which means that the module’s input signal bypasses the upconverter and is output
to the program and monitoring outputs unprocessed. If On-Screen Display (OSD)
monitoring is enabled, the OSD will be present in HD Prog/Mon Output 1 and HD Prog/Mon
Output 2. For information about the OSD monitoring feature, see
Enabling On-Screen
Display on page 13.
When the module is operating in Bypass mode, many parameters are disabled. See
Table 3-2 for a list of parameters that are disabled when the module is operating in Bypass
mode.
Setting Description Parameter Navigation
Select the video input
standard. Video Setup Input Input Video
Standard
[
0 , 4 ]
„
Auto
„
525
„
625
Display detected video
standard. Video Input
Standard Detect
[
4 , 2 ]
(detected standard)
Select an output standard. Output Output Video
Standard [
0 , 2 ]
(select a standard)
Select a loss of video option. Loss of Video [ 0 , 5 ]
„
Pass
„
Black
„
Freeze
„
Test Pattern
If you selected Test Pattern
as the Loss of Video
parameter option, select the
test pattern you want to
display.
Test Pattern [ 0 , 6 ] (select a pattern)
Table 3-2 Parameters Disabled in Bypass Mode
Disabled Parameters
LovOut DmxErrCtrl
TstPat AudEmbSrc
TstPatOn AudEmbPr1
CrcErrPollTime AudEmbPr2
CrcErrClr AudEmbPr3
CcEmbed AudEmbPr4
ArcPreset AudMstrMute
ArcTransMode AudPr1Gain