Imagine NEO DVR-3901, Installation And Operation Manual

Page: 71 / 111

DVR-3901 Installation and Operation Manual 55
Chapter 4: Remote Operation
Time Commands
The following command retrieves a time code from the recorder.
(See
Table 4-8 .)Within the response, the time information is formatted
as ff ss mm hh , where ff is frames, ss is seconds, mm is minutes, and hh
is hours. For example, time code 01:22:33:15 would be formatted in
hexadecimal as 15 33 22 01.
Status Sense Command
The data byte (xx) of this command specifies which status bytes the
recorder will send. (See
Table 4-9 .) The most-significant four bits
indicate the first byte to be returned. The least-significant four bits
indicate the number of status bytes to send. For example, a data byte of
25 hex causes the recorder to send bytes 2 through 6.
Table 4-8. Time Code Command
Command Data (Hex) Response
Current Time Sense 61 0C 01 6E 74 04 ff ss mm hh uu
Table 4-9. Status Sense Command
Command Data (Hex)
Status Sense 61 20 xx uu