Imagine communications NEXIO NX1010 series, Hardware Manual

Page: 39 / 56

NEXIO NX1010 Series
Hardware Guide
35
The LED indicator lights status states are shown below.
Table 3-2 LED Indicator Lights Status States
LED Description
Solid Green Status is good.
Solid Red Status is bad.
Buzzer
The Buzzer provides the following indications:
„
Short beep during power on (system boot up) indicates successful
mirroring hardware self test.
„
Second beep indicates the mirroring hardware is running in single
mode.
„
Continuous or intermittent beep indicates a drive failure.
LCD Display
Navigation
Buttons
The LCD display navigation buttons allow you to power on and off the
NX1010, reset the system, and navigate through the LCD display for
various information.
reset button/
power supply
alarm reset
button
power on
and off
button
Figure 3-5 LCD Display Navigation Buttons