Manual
Page 91
C.3.5
Output Option Copy
This output option prints directly to a previously installed network printer. The
Option
key
is used to configure the remotely connected printer.
Picture 97: Output Option Copy
Click at the link
Options
to set the connection to the printer and to define specific
parameters.
C.3.5.1 Remote Printer
Parameter
Description
Printer Preset
Choose a printer configuration out of five possible set of
parameters. If you click on
Change Name
you can change
the name of this set.
Connection Type
Choose between
IP Networking
and
SMB Printer Queue
.
Address
(with IP Networking only)
Enter the IP address of the printer.
Port (9100)
(with IP Networking only)
Enter the IP port of the remote printer. Default is port 9100.
Connection Timeout
(with IP Networking only)
Choose the timeout for connecting to the remote printer
before the connection is aborted.
Port (139)
(with SMB Printer Queue only)
Enter the IP port of the remote printer. Default is port 139.
Note:
Each change of an entry field is transferred to the scanner immediately.
Summary of Contents for WideTEK 42
Page 1: ...Manual This device is compliant This device is compliant...
Page 2: ......
Page 131: ...Manual Page 131 For your notes...
