Image Access WideTEK 42, Manual Manual

Page: 33 / 131

Manual Page 33
A.13.2 Turning-off the scanner
Note: Always turn off the WideTEK 42/WideTEK 48 scanner with the Stop
button on the touch panel!
The main power switch should only be used when the scanner is in
stand-by mode and
before the scanner is disconnected from the
electrical outlet.
To turn the WideTEK 42/WideTEK 48 off, press and hold the Stop button on the touch
panel.
While the Stop button is held, a counter in the button shows the remaining time until the
scanner is powered down.

Going to sleep in x seconds
Picture 23: Touch panel while shut down in progress
At the end of the power-down sequence the display will be dimmed.
A.13.3 The Help Function
To support the user when working with the scanner, a help function is integrated into the
touch panel menus. A
Question Mark (?) symbol in the lower right corner of the screen
activates the help function.
After touching the question mark, all controls in the screen start blinking. To get the
corresponding help text, the appropriate control must be touched. To return to the
respective screen, the screen must be touched again on any arbitrary place.