Image Access WideTEK 42, Manual Manual

Page: 38 / 131

Page 38 Manual
B.3.2 White Balance
Note: The paper transport wings must be inserted before starting the white balance.
Picture 31: Insert control sheet
Touch the White Balance button to switch to the
next screen. Now insert the control sheet. It must
be transported forward and reverse. Then touch
the
Cont. button.
The control sheet will be pulled in and the
measurement starts. While the measurement is
running a graphic symbol shows the progress.
The Abort button returns to the previous screen.
Picture 32: Results of White Balance
After the white balance has been finished, the
result is displayed.
Touch the Finish button to return to the
Self Test 1 screen.
B.3.3 Lamp On / Off
Touch the Lamp On / Off button to switch the lamps on. As long as the button is touched,
the lamps will shine.
B.3.4 Exit Selftest
Touching Exit Selftest finalizes the setup mode, switches to the operation mode and
shows the start menu.