Manual
Page 53
B.4.3
Format Control Screen
The parameters are set in three screens;
Format Control 1
to
Format Control 3
.
To switch between the
Format Control
screens use the buttons
and
.
B.4.3.1 Format Control 1
Picture 50: Format Control 1
B.4.3.1.1 Format
This control specifies the format of the document. In most cases the setting
Auto
should
be selected.
The format list includes the well-known DIN A formats as well as US ANSI formats, e.g.
Letter or US C. Some formats are specified with an additional
L
(etter) or
P
(ortrait).
B.4.3.1.2 Start Page
This defines the start page if
Splitting
is activated.
B.4.3.1.3 Rotation
The value set here defines the rotation of the image in a clockwise direction after
scanning.
B.4.3.1.4 Mirror
This control activates the horizontal mirroring of the image.
It can be useful if scanning a transparency or a blueprint from the back side.
B.4.3.1.5 Splitting
The following options are valid:
•
Left
: The image is taken from the left side of the specified area.
•
Right
: The image is taken from the right side.
•
Auto
: Divides the specified scan area symmetrically into two sides and sends the
images consecutively. The second image will be sent without scanning the
document again.
The start is defined in
Start Page
(see chapter B.4.3.1.2).
Summary of Contents for WideTEK 42
Page 1: ...Manual This device is compliant This device is compliant...
Page 2: ......
Page 131: ...Manual Page 131 For your notes...
