Image Access WideTEK 36CL, Setup Instructions

Page: 23 / 72

Prepare for Setup
23
Alternatively, switch the scanner into the standby mode as follows:
➢
Touch the blue illuminated power button (2) and confirm the action in
the dialog on the touchscreen.
The scanner shuts down. This process can take up to 40 seconds.
The power button lights up green. The scanner is in standby mode.
To switch off the scanner for longer periods, proceed as follows:
➢
Make sure that the scanner is in standby mode.
The power button is illuminated in green.
➢
Press the MAIN SWITCH (1) in the "0" position.
To switch off the scanner using a hard shutdown, proceed as follows:
➢
Press and hold the power button for longer than four seconds.
The power supply to the scanner is immediately interrupted.
The power button is illuminated in green.
➢
Press the MAIN SWITCH (1) in the "0" position.