Image Access WideTEK 36CL Setup Instructions Download Page 19 | Manualshive

Page: 19 / 72

background image

Prepare for Setup

19

Connect the Optional Monitor

CAUTION

Incorrect laying of the connection cables can cause tripping.
Fractures, contusions and bruises can be the result.

➢

Place the connecting cables so that nobody can trip over
them.

To connect the optional monitor, proceed as follows:

➢

Connect the HDMI connector plug of the monitor to the HDMI
connector socket, located on the back of the scanner.

Connect the Optional Touchscreen

CAUTION

Incorrect laying of the connection cables can cause tripping.
Fractures, contusions and bruises can be the result.

➢

Place the connecting cables so that nobody can trip over
them.

To connect the optional touchscreen, proceed as follows:

➢

Connect the HDMI connector plug of the touchscreen to the HDMI
connector socket, located on the back of the scanner.

➢

Connect the USB connector plug of the touchscreen to the USB
connector socket, located on the back of the scanner.

«
...
17
18
19
20
21
...
»

Summary of Contents for WideTEK 36CL









































































Reviews:

No comments

Related manuals for WideTEK 36CL

Brand: Baracoda Pages: 2

Brand: Baracoda Pages: 48

Brand: HEIDELBERG Pages: 124

TellerScan 220E

Brand: Digital Check Pages: 18

Brand: Panduit Pages: 7

Brand: Z Corporation Pages: 48

Brand: Banner Pages: 80

Brand: Avision Pages: 38

BCS 36 8ex Series

Brand: Bartec Pages: 12

DIMAGE SCAN MULTI PRO

Brand: Minolta Pages: 32

Brand: VDO Pages: 2

Brand: Datalogic Pages: 65

Brand: GMC Pages: 145

Brand: TEKNIHALL Pages: 46

MobileOffice S410

Brand: Plustek Pages: 2

Brand: FAAC Pages: 12

Brand: Nikon Pages: 47

Brand: Hand Held Products Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands