7
Getting Started
The first operation needed when you switch the cooker on is to
set the clock, the main oven will not operate if the clock isn’t set.
The procedure for each model will vary. See page 14 for MP
model clock settings and page 15 for built-in appliance clock
settings as they differ.
Setting the Clock
The clock is a 24 hour clock and must be set before the main
oven can be operated.
A = Minute minder
B = Auto time Start
C = Auto time end
D = Decrease the selected parameter
E = Increase the selected parameter
A B C D E
To set the clock – E3 Models
When first switching the cooker on at the isolation switch:
Press bell symbol
once, this will stop clock flashing
Hold the two buttons with pan symbols
and
until
the clock reads HOUR on the display
You now have three seconds to commence next stage
Press
or
to adjust the display, it will start from 12am
and change to pm after advancing the hours
When your chosen time is reached remove your finger from
the button. The clock will flash for three seconds and then set
Note:
Make sure the oven function knob is set to off
Before Cooking in your Ovens
1.
Switch oven function selector knobs to Conventional Oven
(position 2). (There will be only one oven function selector
for single oven models.)
2.
Set the oven thermostat to 175 °C
3.
When the orange neon lights go out, set both oven
selector switches to Standard Grill (position 5)
4.
Reset both oven stats to 200 °C
5.
When the orange neon lights go out, the small oven can be
switched off as it is now ready for cooking
6.
Now set the large oven selector switch to the Baking Oven
(position 8) setting
7.
Reset the oven temperature to 225 °C
8.
When the orange neon light goes out, the large oven can
be switched off. It is now ready for cooking
By carrying out this procedure all manufacturing residues that
may still be present on the elements and inside of the oven are
burnt away - any odours or smells given off are harmless whilst
doing this process.
Note: The cooling fan will operate at 45 °C to keep the outer
facia and electrics from overheating. It will switch off when the
internal temperature is reduced (thermostatically controlled).
Change °F to °C
Turn the oven on and begin to adjust the temperature so the
screen flashes
Hold in the temperature knob for 8 seconds
Child Lock – Oven
The oven is fitted with a safety device that stops undesired or
accidental start-up. To activate the safety lock: with the oven off,
hold down the temperature knob for 3 seconds. A brief warning
sound is emitted and “n–0” appears on the display. In this state,
it is impossible to turn the oven on. To remove this safety lock,
press and hold the temperature knob for 3 seconds.
Child Lock – Induction Hob Top
When the Child Lock is activated all the hob cooking areas are
switched off and cannot be switched on accidentally.
To activate the Child Lock turn the controls for the two back
cooking zones clockwise and hold for a few seconds until ‘L’
appears on the hob top display.
The Child Lock is deactivated by repeating the process in the
same way.
If a knob is turned whilst the Child Lock is activated an ‘L’ will
appear on the display.
