Security Status
Procedure 7-2 Disable Enhanced Security
Step Action
1
Select
Setup
on the GUI banner to display the setup menus.
2
Select
Security Status
from the
Security
menu.
3
Select the
Security Overview
tab.
4
Deselect the
Enable Enhanced Security
check box to disable enhanced security.
Note:
When in Enhanced Security, changing the security mode will require the admin account password.
5
Click
Apply
.
Note:
Any changes to the Security Mode are logged in the Security Log.
- End -
Setting Communication Protocols
This section allows you to modify the communication protocols that are used.
Procedure 7-3 Enable/Disable Communication Protocols
Step Action
1
Select
Setup
on the GUI banner to display the setup menus.
2
Select
Security Status
from the
Security
menu.
3
Select the
Security Overview
tab.
4
Select the
HTTP
check box to enable HTTP.
The default setting is ‘Enabled’.
5
Select the
HTTPS
check box to enable HTTPS.
The default setting is ‘Enabled’.
6
Select the
FTP
check box to enable FTP.
The default setting is ‘Disabled’.
7
Select the
Dyn DNS
check box to enable Dyn DNS .
The default setting is ‘Disabled’.
8
Select the
SMTP
check box to enable SMTP.
The default setting is ‘Disabled’.
9
Click
Apply
.
Illustra Pro PTZ Configuration & User Guide
81
