RIGEL EU
Operating manual - English
14
Depth calibration:
Depth calibration is regulation of the cutting depth .
Proceed as follows:
1) Remember to disconnect the machine from the mains.
2) Insert the supplied gauges horizontally in the clamp housing (fig. 8-B).
3) Make sure the back of the gauges is lined up perfectly with surface of the clamp. (fig. 8-B).
4) Move the carriage towards the cutter and the tracer until the tracer rests on the gauge.
5) Turn the cutter manually.
6) The cutting depth of the machine is correct when the cutter skims the gauge freely. Otherwise pro-
ceed as follows:
a) Loosen the screw (J).
b) Turn the knob (K) clockwise or anticlockwise until the above mentioned occurs.
c) Fasten the screw (J).
.
Fig. 8(A-B)
K
J
H
H
B
A
B
Summary of Contents for Rigel
Page 1: ...Operating manual DMS200372 vers 3 0 RIGEL EU ...
Page 4: ......
