Ilco Orion Rigel, Operating Manual

Page: 7 / 26

Operating manual - English RIGEL EU
5
1 TRANSPORT
The RIGEL EU key-cutting machine is easily transported and is not dangerous to handle. The packed
machine can be carried by one person.
1.1
Packing
The RIGEL EU is packed in a strong cardboard box, the dimensions of which are shown in fig. 3, suffi-
ciently robust to be used for storing the machine for long periods.
Inside the box the machine is enclosed in two expanded polymer shells. The shells and cardboard box
ensure safe transportation and protect the machine and all its parts.
Fig. 3
1.2 Transport
To avoid damaging the RIGEL EU it must always be transported in its packing case. This will prevent
sudden movements or rough handling from damaging the machine, persons or things.
1.3
Unpacking
To remove the machine from the packing box:
1) cut the straps with scissors and remove.
2) prise off the staples.
3) open the box without damaging it as it may be used again (e.g. removals, dispatch to the manufac-
turers for repairs or servicing).
4) check the contents of the box, which should comprise:
- 1 RIGEL EU key-cutting machine packed in a protective shell.
- 1 set of documents, including: operating manual, spare parts list and guarantee.
- 1 chippings tray.
- 1 tool tray.
- 1 connecting wire.
remove the key-cutting machine from the protective shell.
1.4
Handling the machine
When the RIGEL EU has been unpacked, place it directly on its workbench.
This operation can be carried out by one person, firmly holding the base, and no other part, to lift and
carry the machine.
1.5 Safety
Switch and cutter protection, mechanical stop of the carriage.
500 mm
600 mm
41
0 mm
Keep dry
This side up
Handle with care