IKUSI SPI-300, Basic Manual

Page: 29 / 56

SPI-300 - Basic Guide
29
- "Pick list" : Is a element that contains a folded list. When you select it
(SEL command), the choices of the list are displayed. Then you can select
a choice. (With the keys

and

you can browse through the pages of the
list).

• 21  471.25MHz


22  479.25MHz


23

487.25MHz


24

495.25MHz

2. PROGRAMMING THE MODULES
2.1 - Connecting the SPI-300
The modules of a headend are programmed one
by one through individual connections to the SPI-
300. To begin the programmation of a module,
first power it and then plug the cable of the pro-
gramming unit into the CONTROL socket.

The programming guides are in the website www.ikusi.tv
2.2 - Detection of the Module
When you connect the SPI-300 to the module, all data for identification,
configuration and status of the module are loaded on the SPI-300. A detec-
tion screen appears for a short time, and next the display shows the Basic
Information screen, which identifies the module and presents its most
representative configuration and status data.
MTI-900 Alarm : No
F01.95 f01.15
Adq: X BER: 4.29E-5
OK
SYNC STATUS
+VLNB
IKUSUP
QPSK/8PSK
IN
+12V
COFDM OUT
CONTROL
MTI-900
QPSK/8P
SK ® COFDM
TRANSMODUL
ATOR
SPI-300