SPI-300 - Basic Guide
35
Appendix A — FIRMWARE UPDATE
The files required for using the SPI-300 are:
• The
Instaling Load software "Install SPI-300".
Install the pc to interact
with the SPI-300, when it is intended to update the firmware of both ClassA
modules, such as the own SPI-300 to be able to recognize new control
modules.
This application allows you to load the firmware from the pc to the SPI
controller to be installed later in ClassA modules.
•
The SPI-300 firmware
is the operating system of the controller program-
ming unit.
Both files can be downloaded from the website of ikusi, http://www.ikusi.
tv/en/headends/class-a/class-a-accessories/spi
A.1 - Installing Load Software on the PC
The minimum requirements your computer needs to install Load Software
are the following:
- Computer : IBM-Compatible 486 or higher
- Hard Disk : 10 MB free space
- Serial Port : COM Port, RS-232
- Mouse : Installed
- RAM : 16 MB (64 MB recommended with Windows 2000 and XP)
- Display : VGA
- Operating System : Windows
®
95 / 98 / ME / NT / 2000 / XP
To install Load Software:
1. Start Microsoft Windows and open a web browser.
2. Enter to the Ikusi web page, http://www.ikusi.tv/en/headends/class-a/
class-a-accessories/spi
3. Open the file " Instaling Load software".
4. By double-clicing in SETUP.EXE enter the installation screen.
Now the programmes folder of the Start Menu will include the "Install SPI-
300" programme, from which you can launch the application.
The Load Software so installed allows:
a) To load in the SPI-300 new versions of firmware files for ClassA modules.
These files will remain available to be installed on the modules.
Summary of Contents for SPI-300
Page 2: ......
