SPI-300 - Basic Guide
23
Accesories
The SPI-300 is supplied with the following accessories:
- 1 "RJ-45 / DB-9" interfacing cable to link the unit to the ClassA modules.
- 1 "RJ45 / USB" interfacing cable to link to the SZB-400 modul. NO use to update
or upload firmwares.
Connecting the Cable
To programme ClassA modules you must use the enclosed RJ-45 / DB-9
cable. The RJ-45 tip plugs in the rear socket of the SPI-300 and the DB-9
tip plugs in the CONTROL socket of the module.
Using an Auxiliary Power Supply
The SPI-300 does not require batteries, it is powered directly from the
module to which is connected. Only if you are going to perform a firmware
update through your PC, you need an aux15VDC/1A power supply.
The DC cable of the power supply plugs in the rear jack socket of the
programming unit.
Cable RJ-45 / DB-9
Cable RJ-45 / USB
SYNC
STATUS
+V
LNB
IKUSUP
QPSK/8PSK IN
+12V
COFDM OU
T
CONTROL
MTI-900
QPSK/8P
SK
®
COFDM
TRANSM
ODULAT
OR
SPI-300
SPI-300
SZB
-400
AUD
IO
VID
EO
MH
z
SZB
-400
AUD
IO
VID
EO
RJ-45 / DB-9
SPI-300
ClassA modul
SZB-400 modul
USB
DB-9
DC cable of the
auxiliary power supply
(+)
central conductor
Summary of Contents for SPI-300
Page 2: ......
