10
Web Interface guide HTI-404
The registration process is different if it is the result of replacing a module (for example, due to failure).
In that case, when placing a new module in the position of one that had been already registered by the
headend, the user can choose between to add it without modifying the configuration of the module or to
copy the configuration of the module that was previously registered in that slot. In the following example,
starting from the previous headend with 3 HTIs, all registered, the HTI of slot 4 has been replaced with a
new HTI:
A module with two possible configurations is displayed: one in grey background, corresponding to the
previous module that was already registered in the headend, and another one in yellow background,
corresponding to the configuration of the new module pending registration.
If you want to copy the settings from the previous module, push
Clone
button. If, instead, you only want
to register the new module without copying the previous configuration, push Add button. In both cases, as
result a screen will be displayed where the module appears as registered.
