6
Web Interface guide HTI-404
2. HEADEND CONNECTION
The instructions for connecting the headend are described in detail in the guide that is provided with the
HTI module. Also, that guide can be downloaded from our web page www.ikusi.tv.
Briefly, the steps to follow are:
Insert the HTI modules and the PSU-150 power supply in the BACK-500 base-plate. One of the HTI modules
must be inserted in the slot 2 of the base-plate (master module).
Connect the different cables from the multiswitch to the module inputs.
Connect the pc to the USB port of the master module, located in the slot 2 of the base-plate, with a
USB-ethernet adapter.
NOTE: It is recommended to use USB-ethernet adapters based on AX88179 or AX88772 chipsets
3. COMMUNICATION WITH THE HEADEND
HTI is configured through a web page generated by the own headend. Use IKUSI HEADEND DISCOVERY application to
access this web page without modifying manually the network configuration of your pc. You can download the IKUSI
HEADEND DISCOVERY aplication from www.ikusi.tv web page.
NOTE: You must use IKUSI HEADEND DISCOVERY version 1.8.5 or higher
Open IKUSI HEADEND DISCOVERY application (the network card IPV6 protocol will be automatically enabled or
permission will be requested to do so).
