background image

12

f) 

If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply.

 Use of an RCD reduces the risk of 

electric shock.

3) Personal safety

a) 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do not 

use a power tool while you are tired or under the 

influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in 

serious personal injury.

b) 

Use personal protective equipment. Always wear 

eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries.

c) 

Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool.

 Carrying power tools with your finger on the 

switch or energising power tools that have the switch 

on invites accidents.

d) 

Remove any adjusting key or wrench before turning 

the power tool on. 

A wrench or a key left attached to 

a rotating part of the power tool may result in personal 

injury.

e) 

Do not overreach. Keep proper footing and balance 

at all times.

 This enables better control of the power 

tool in unexpected situations.

f) 

Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from 

moving parts. 

 Loose clothes, jewellery or long hair can 

be caught in moving parts.

g) 

If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used. 

Use of dust collection 

can reduce dust-related hazards.

4) Power tool use and care

a) 

Do not force the power tool. Use the correct power 

tool for your application. 

The correct power tool will 

do the job better and safer at the rate for which it was 

designed.

b) 

Do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c) 

Disconnect the plug from the power source and/

or the battery pack from the power tool before 

making any adjustments, changing accessories, or 

storing power tools. 

 Such preventive safety measures 

reduce the risk of starting the power tool accidentally.

d) 

Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained 

users.

e) 

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s ope-

ration. If damaged, have the power tool repaired 

before use. 

 Many accidents are caused by poorly 

maintained power tools.

f) 

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations dif-

ferent from those intended could result in a hazardous 

situation.

5) Battery tool use and care 

a)

 Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

b) 

Use power tools only with specifically designated 

battery packs. 

Use of any other battery packs may 

create a risk of injury and fire.

c) 

When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, 

nails, screws or other small metal objects, that can 

make a connection from one terminal to another.

 

Shorting the battery terminals together may cause 

burns or a fire.

d) 

Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact acciden-

tally occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help.

Liquid ejected from 

the battery may cause irritation or burns.

6) Service

a)

 Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 

This will ensure that the safety of the power tool is 

maintained.

Hedge trimmer 

Safety Warnings 

Keep all parts of the body away from the cutter blade. 

Do not remove cut material or hold material to be 

cut when blades are moving. Make sure the switch 

is off when clearing jammed material. 

 

A moment of 

inattention while operating the hedge trimmer may result 

in serious personal injury.

Carry the hedge trimmer by the handle with the cutter 

blade stopped. When transporting or storing the 

hedge trimmer always fit the cutting device cover.  

Proper handling of the hedge trimmer will reduce possible 

personal injury from the cutter blades.

Hold the power tool by insulated gripping surfaces 

only, because the cutter blade may contact hidden 

wiring or its own cord. 

 

Cutter blades contacting a „live“ 

wire may make exposed metal parts of the power tool 

„live“ and could give the operator an electric shock.

Keep cable away from cutting area.  

During operation 

the cable may be hidden in shrubs and can be accidentally 

cut by the blade.

GB

   ENGLISH

Summary of Contents for IHT 550

































Reviews: