133
A specific Subnet Mask must be entered into this field if the IP Setup parameter
is configured to MANUAL. Enter the Subnet Mask using the numeric keypad. The
Subnet Mask must be entered in the following format: XXX.XXX.XXX.XXX. If an
invalid Subnet Mask is entered the following error message will be displayed:
Press the Enter soft key to save the new settings. If the IP Setup parameter is set
to AUTO, you do not need to enter a Subnet Mask manually.
10.3.9 Device Name
Highlight the Device Name parameter using the
,
soft keys. When the Device
Name parameter is highlighted, press the Edit soft key.
The Device Name screen will appear as follows:
From this screen you may enter a Device Name for the APT 400XAC. The
Device Name is used to identify the APT 400XAC on your server and may be
used in place of a dedicated IP Address. Use the arrow keys to highlight a letter
and press the Select soft key to select the highlighted letter. The Device Name
may be a maximum of eight characters and MUST start with a letter. If the
Device Name does not start with a letter the following error message will be
displayed:
