www.ikegps.com/quickstart
Page 103
www.ikegps.com/support
available storage media.
Reinserting or changing an SD card.
Whenever you remove or change an SD card on
your ike, wait at least 6 seconds before inserting another card into the slot. Your ike
needs this short time delay to properly identify and use the newly inserted card. If a card
is re-inserted too quickly, your ike may need to reset. To avoid this problem, close all
programs before changing or re-inserting a card.
Copying data from an SD card or USB drive.
You can run or copy data from a
peripheral device onto your ike by following these steps:
On your ike, tap
Start > Programs > File Explorer
Tap and hold the file you want to copy to your ike. A
pop-up menu appears, as shown here. Note: If you want
to copy multiple files, tap and drag the stylus over the
files. Once the files are selected, tap and hold the stylus
on the files until a pop-up menu appears.
Select Copy
Open the destination folder where you want to place
your copied file
Tap and hold the stylus on the white space below the
existing files until the pop-up menu appears again
Select Paste. The file is copied and its name appears on the screen