Ikegami OCP-10, Operation Manual

Page: 8 / 63

INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits for a Class A
digital device, against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The
mark means that the following products will meet the Directives 2004/108/EC
and standards EN55032, EN55103- 2 (for the Electromagnetic environment E4-E5).
Use shielded cable.
This equipment doesn’t intend to use at residential areas, so that use in residential
areas may cause interference.
Please attach a core to a cable to connect to a connector of command, Ethernet cable
and EXT by all means. Please make an inquiry to us about the installation of the core, if
necessary.