Ikegami OCP-10, Operation Manual

Page: 17 / 63

1
1. Outline
1.1 Outline
The OCP-10 is an operation control panel that is used by connection to a BS
(Base Station) or CCU (Camera Control Unit) or Camera Head.
1.2 Features
 Knob Free function is adopted
The OCP-10 adopts the knob free function which combines the advantages of absolute
control of potentiometers with the advantages of relative control of rotary encoders.
By pressing and holding the Knob Free switch, the potentiometers (excluding iris
control) are electronically disconnected from controlling the camera. So they can be
re-indexed to mid-range for reference or turned to the opposite end when the mechanical
range of the control hits the end, but the function itself has more control range.
 F.VR Control
One-touch operation is available for allocation of various functions to two user function
F.VR (variable resistor) controls. In addition, the user can customize which pages of
functions that the OCP has access to.
 F. Switch
Two F. switches (F1/F2) are provided, so the user can set the functions freely.
Assigning functions necessary for each user is available, and so the operational
flexibility expands.
Note :
Switches of the OCP and control functions become inoperable if the
connecting camera does not have the corresponding functions.
Reference
:
Refer to the instruction manual of the camera for functions that can
be operated.
 Ethernet compatible (option)
In addition to control by the conventional serial command, control by an Ethernet
network connection is also available. The Operation by LAN cable connection is
available. In addition, because the OCP-10 corresponds to PoE+ (Power over
Ethernet), supplying power by the LAN cable is available.