Ikegami OCP-10, Operation Manual

Page: 32 / 63

16
4.
F. Switch
The OCP-10 allows the user to assign the function of two switches, the F1 and F2
switches.
4.1 F. Switch Customize Function
Item indication
Upper section : Allocated switch
(F1 or F2)
Lower section : Allocated function
Turning: Selecting function for
allocation
Pressing: Ending the F. switch
customize mode
When the KNOB FREE switch
and the F1 (F2) switch are
simultaneously pressed, the
Customize mode screen of the
F. switch is indicated.
1. When the F. switch (F1 or F2) is pressed for approximately 2 seconds while the
KNOB FREE switch is also pressed, the F. switch customize mode starts.
2. As an initial state of the F. switch customize mode, the switch name to be
customized is indicated at the upper section of the indicator and the function
currently being allocated is indicated at the lower section of the indicator.