Ikegami OCP-10, Operation Manual

Page: 35 / 63

19
4.2.2
Menu Operation from OCP
When "MENU ON/OFF" is allocated to the F. switch, the camera head and the
BS/CCU menu can be operated from the OCP.
[Menu Operation]
Menu select command switching (SEL/NEXT)
(F.VR function selector switch)
Rotating: Up/Down navigation
Pressing: Push Set to enter sub-menu /change
setting
Item display
Upper section: MENU
Lower section: SEL/NEXT
Menu screen (HDK-79GX) DPC sample area setting screen (HDK-79GX)
1. When the F. switch is pressed for approximately 2 seconds while the MENU
ON/OFF function is allocated to the F. switch (F1 or F2), the menu operation
mode starts, and the menu screen of the connected camera is displayed.
2. As the initial state of the menu operation mode, "MENU" is indicated at the
upper section of the indicator, and "SEL" is indicated at the lower section of the
indicator.
3. Navigate the menu by turning the rotary switch.
4. Enter a sub-menu and set a change by pressing the rotary switch.
5. When operating the cursor horizontally (SEL) and vertically (NEXT) as for the
sample area setting of the DPC menu, use the F.VR SEL function selector
switch to alternate between ‘SEL’ and ‘NEXT’ as indicated on the lower section
of the indicator.
6. Pressing the F. switch again can ends the menu operation mode.