Ikegami ICD 525, Instruction Manual

Page: 16 / 32

11
1. RED : Adjust the reddish color.
2. BLUE : Adjust the bluish color.
The ATW mode may not work correctly under following lighting conditions.
In this case, select AWC and adjust the white balance.
① The lighting condition (color temperature) is out of control span of ATW
(e.g. clear blue sky, before/after Sun rise/Sun set)
② Too low lighting condition for subject.
③ The white balance function may not work of stability when the camera
aim the fl uoresce lamp or under extremely/rapidly change lighting
condition.
6. DNR (Digital Noise Reduction)
OFF : No function of DNR.
ON : Function of DNR.
1. LEVEL: Adjust the noise reduction
Level. Adjusting value 0 to 20.
Note: Higher reduction value may caused
the blur phenomenon of moving
subject on picture.
7. DAY/ NIGHT
AUTO : Automatic switching is made high quality color picture in the
day, and high sensitivity monochrome pictures at night.
1. DWELL TIME : Adjust the transition
time between DAY and NIGHT
mode. Adjusting value 0 to 20.
COLOR : COLOR Mode fi xed.
B/W : Monochrome Mode fi xed.
WB MANUAL
1. RED 053
2. BLUE 028
3. RETURN
DNR SETUP
1. LEVEL 003
2. RETURN
DAY/NIGHT SETUP
1. DWELL TIME 005
2. RETURN