Ikegami ICD 525, Instruction Manual

Page: 19 / 32

14
1. DETECT SENSE : Adjust the
detect sensitivity for moving
subject. Higher value setting, more
sensitivity of detection (value 0 to
127).
2. BLOCK DISP : Display the block
screen for detected Area of picture.
OFF : Inactivate BLOCK DISP
function.
ON : Display the block screen for detected area of picture.
3. DETECT AREA : Set the detection area on picture (8 x12 blocks).
Detection area picture is inverted negative picture.
The cursor on picture (block) can be moved with L, R, U, D button,
and determined the detection area on picture by pressing “E”
button.
4. MONITOR AREA : Set non detect
Area (Up to 4 areas)on picture.
1. AREA SEL : Set 4 non detect
areas. 1/4 Red frame, 2/4 Green,
3/4 Violet, 4/4 Yellow.
2. MODE : Active non detect area.
3. TOP : Set top frame position.
4. BOTTOM : Set bottom frame
position.
5. LEFT : Set left frame position.
6. RIGHT : Set right frame position.
Selection of up and down (0 to 15).
Selection of the right and left (0 to 23).
7. PRIVACY MASK
Set the privacy mask up to 15 masks on picture.
1. AREA : Select the setting privacy
mask between 1/15 to 15/15.
2. MODE : Set privacy mask display or
non display on picture.
OFF : No display the privacy mask.
ON : Display the privacy mask, and
below setting is valid.
3. POSITION : Set the position and
size for privacy mask following sub menu screen.
MOTION DET
1. DETECT SENSE 111
2. BLOCK DISP OFF
3. DETECT AREA
4. MONITOR AREA
5. RETURN
MONITOR AREA
1. AREA SEL 1/4
2. MODE OFF
3. TOP 003
4. BOTTOM 012
5. LEFT 002
6. RIGHT 005
7. RETURN
PRIVACY MASK
1. AREA 1/15
2. MODE OFF
3. POSITION -
4. COLOR -
5. MASK TONE -
6. MOSAIC -
7. RETURN