Ikegami BSH-300, Operation Manual

Page: 50 / 54

㻣㻙㻢㻌 䠓䠊㻿㼜㼑㼏㼕㼒㼕㼏㼍㼠㼕㼛㼚㼟㻌
㻮㻿㻴㻙㻟㻜㻜㻌㻔㼁㻕㻌㻔㻱㻕㻌㻝㻠㻜㻡㻌㼂㻱㻾㻞
3. MCP connector
Pin No. Name Function Direction External interface
1 CSU SL AV Select signal (VIDEO) of CSU No. IN
2 CSU SL BV Select signal (VIDEO) of CSU No.
IN
3 CSU SL CV Select signal (VIDEO) of CSU No.
IN
4 CAM SL AV Select signal (VIDEO) of camera No.
IN
5 CAM SL BV Select signal (VIDEO) of camera No.
IN
6 CAM SL CV Select signal (VIDEO) of camera No.
IN
7 CSU SL AC Select signal (COMMAND) of CSU No.
IN
8 CSU SL BC Select signal (COMMAND) of CSU No.
IN
9 CSU SL CC Select signal (COMMAND) of CSU No.
IN
10 CAM SL AC
Select signal (COMMAND) of camera
No.
IN
11 CAM SL BC
Select signal (COMMAND) of camera
No.
IN
12 CAM SL CC
Select signal (COMMAND) of camera
No.
IN
13 HED TX(+) Send data (+) from BSH-300 to MCP OUT
14 HED TX(-) Send data (-) from BSH-300 to MCP OUT
15 HEC RX(+) Send data (+) from MCP to BSH-300 IN
16 HEC RX(-) Send data (-) from MCP to BSH-300 IN
17 +12V OUT DC+12V power supply output
18 +12V OUT DC+12V power supply output
19 +12V RET DC+12V power supply output ground
20 +12V RET DC+12V power supply output ground
21 YC PARDE YC PARADE control signal
IN
22 STAIR ON STAAIR ON control signal
IN
23 NC
24 NC
1 2 3 4 5 6 7 8 9
17 16 18 19 20 21 22 23 24
10 11 12 13 14 15
Layout
Insert side
This connector is used to input/output various
signals between MCP and BSH-300.
Main body side: SW-162A(09)
Cable side: P-1624BA