Ikegami BSH-300, Operation Manual

Page: 15 / 54

䠍䠊㻻㼢㼑㼞㼢㼕㼑㼣㻌 㻝㻙㻝㻌
㻮㻿㻴㻙㻟㻜㻜㻌㻔㼁㻕㻌㻔㻱㻕㻌㻝㻠㻜㻡㻌㼂㻱㻾㻞
1 Overview
1.1 Overview
BSH-300 is a converter that enables the conventional device that is compatible with Ikegami
command system to communicate via Ethernet, and also serves as a network hub that connects
to a camera head, BS/CCU and control panels that are not compatible with Ethernet.
1.2 Features
There are the following three types of BSH-300 depending on the application.
1)
A-Type
z
Supports six control panels.
Up to six control panels that are not compatible with Ethernet can be connected. The
conventional CP cable is used for the connection. The additional power supply unit such as
AC pack is not necessary as the power (DC+12V) is supplied via CP cable.
2)
B-Type
z
Supports six BS/CCUs.
Up to six BS/CCUs that are not compatible with Ethernet can be connected.
3)
C-Type
z
Supports one MCP and two OCPs.
Up to one MCP and two OCPs that are not compatible with Ethernet can be connected. The
conventional MCP cable is used for the connection of MCP, and the conventional CP cable is
used for the connection of OCP. The additional power supply unit such as AC pack is not
necessary as the power (DC+12V) is supplied via MCP cable or CP cable.
4)
Common features among three types
z
Equipped with a preview control output
This device is equipped with the preview control output that used be in OCP, which enables
the preview function in the panelment.