Ikegami BSH-300, Operation Manual

Page: 37 / 54

䠏䠊㻸㻯㻰㻌 㻿㼏㼞㼑㼑㼚㻌 㻟㻙㻝㻡㻌
㻮㻿㻴㻙㻟㻜㻜㻌㻔㼁㻕㻌㻔㻱㻕㻌㻝㻠㻜㻡㻌㼂㻱㻾㻞
մ
ASSIGN(BS/CCU)
Sets the IP addresses of the BS/CCU to which the OCP panels are connected. These
OCP panels are connected to the OCP back connectors 1 and 2 of this device.
㻭㻿㻿㻵㻳㻺㻌㻮㻿㻛㻯㻯㼁㻌㻯㻴㻝
㻝㻥㻞㻚㻝㻢㻤㻚㻜㻜㻝㻚㻝㻜㻜㻌
You can switch the camera select No. with CH
ʊ on the right upper corner of the
LCD screen.
See "3.3.1 A-Type menu
ձ
IP ADDRESS" for the procedure of setting the
address.
You can change the IP addresses for CH1 only when the "IP ADDR.SETTING"
in
ն
is set to "RANDOM". When it is set to "SEQUENCE", you can switch the
displays (except for CAM01) but cannot change the IP addresses.
յ
DATE/TIME
Sets the date and time.
See "3.3.1 A-Type menu
մ
DATE/TIME" for the procedure of setting the
date and time.
ն
IP ADDR.SETTING
Selects whether to make the setting of IP address "SEQUENCE" or "RANDAM".
SEQUENCE: Makes the setting of IP addresses in sequence, starting from MCP.
You cannot change the IP addresses of CH2 and CH2 in this setting.
Also makes the setting for
ճ
ASSIGN (MCP) in sequence, starting
from MCP CAM01, and for
մ
ASSIGN (OCP) in sequence, starting
from OCP CH1.
RANDOM: IP address can be set in each channel.
շ
MCP CAMSEL END
Please set the last channel of the MCP camera select.
ո
MCP SERIAL CONT
Please set the serial control status of the MCP camera select.
See the "MCP-200 operation manual". This item should be set as the
same as the panel configuration "CSU Serial Control" of MCP-200.
չ
PROGRAM UPDATE
See "3.3.1 A-Type menu
ն
PROGRAM UPDATE" for the procedure of
updating the reference firmware.