Ikegami BSH-300, Operation Manual

Page: 43 / 54

䠒䠊㼀㼞㼛㼡㼎㼘㼑㼟㼔㼛㼛㼠㼕㼚㼓㻌 㻢㻙㻝㻌
㻮㻿㻴㻙㻟㻜㻜㻌㻔㼁㻕㻌㻔㻱㻕㻌㻝㻠㻜㻡㻌㼂㻱㻾㻞
6 Troubleshooting
In the case of network operation, the connected devices could fail simultaneously. This is caused
by the network failure, in which the command control cannot be performed correctly. There are
several causes for the network failure.
࣭
Mistakes in the IP address setting
If the IP addresses are duplicated, it may cause failure. Check if the IP addresses for devices
are duplicated.
࣭
Device failure
Failure in a particular device may cause malfunction. In order to find the failed device, it is
necessary to temporarily disconnect devices from the network. OCP-200/MCP-200 can be
disconnected by opening the update screen.
See the operation manual of OCP-200/MCP-200 for details.
Note
Even if the network is disconnected, the hardware will not be completely
disconnected. Hence, in the case of device failure of the network driver, this
operation may not be able to disconnect it. In this case, the connected
COMMANDO connector needs to be removed.