Ikco DONG FENG H30 2016, Owner'S Manual

Page: 33 / 166

32
1
Backrest resetting
Place the seat belt at two sides and
push the seat backrest upwards until it
is locked reliably.
After the rear seat backrest has been
folded fully, the trunk space will be
enlarged.
There is one button at the left top and
right top of the backrest respectively.
Detach the latch plate of the middle seat
belt, fully retract the belt and push the
side belt aside. Press down the button
forcibly to fold the backrest forwards.
REAR SEAT (H30, H30 CROSS)
Backrest folding
The 6/4 split-type seat backrest can be
partially or wholly folded according to
the actual requirements.
Fold the right backrest of rear seat
Note:
When resetting the rear seat backrest, always
place the side belt at two sides smoothly, pull
out the middle seat belt and insert the lower
latch plate into the corresponding buckle. After
restoring the backrest to the normal position, it
is a must to check that the backrest has been
locked reliably, or else, the articles in the trunk
may enter into the passenger compartment and
hurt passengers in case of emergency braking
or collision.