IKAR ANCHORAGE SLINGS, Instructions For The Use And Inspection Records

Page: 17 / 104

17
ENGLISH
•
using only a sponge or soft nylon brush
•
using fresh clean water to rinse the detergent off the Anchorage Sling
•
drip dry the equipment
•
allowing the Anchorage Sling to thoroughly dry out before next use
•
ensure that the following cleaning methods are NOT used:
•
water over 40º C
•
bleach
•
any detergent not suitable for bare skin
•
wire brushes or other scouring agents
•
Hochdruckreiniger o. ä.,
•
jet wash or other power products,
•
radiators or other direct heat sources
ensure that a thorough visual and tactile examination of the Anchorage Sling is made after cleaning,
before the item is allowed to be re-used.
Before using disinfectants, you have to contact the manufacturer due to the complex legal product classifications
based on the specific applications and constituents.
Storage
•
ensure that the Anchorage Sling is stored in an area that is
•
clean
•
free from airborne contaminates (e.g. dust or sand)
•
free from harmful chemicals (liquid or fumes)
•
dry
•
not in direct sunlight
•
not subject to extreme temperatures (below -15°C and above +50°C)
•
ensure that the Anchorage Sling is not stored under tension or load
Accessories
Please note
: In order to prevent a negative impact on the safe function of the fall arresting devices, it is only per-
mitted to use accessories approved by the manufacturer (e.g. rescue clamps to DIN 19428:2018, protective covers,
etc.). The manufacturer is not liable for any accidents involving the life and limb of the user if using non-approved
accessories.