13
EUROSTAR 100 control:
The direction of rotation of the
EUROSTAR 100 control
stirrer
can be changed by pressing the “
Rev
” button (
K
) when the stirrer
is in stand-by status (stationary).
EUROSTAR 200, 200 P4 and 400 control:
• Speed setting:
You can use the rotary knob (
B
, see
Fig. 1
) to pre-set the required
speed before you start the device. If you then press the rotary
knob(
B
, see
Fig. 1
) the device starts at the speed you set. When
a change is made to the speed, the rated speed is shown in the
display (
C
, see
Fig. 1
). When the device is stopped, the button (K,
see
Fig. 1
) can be used to switch between the two speed ranges
(
I
and
II
). When in standby mode, the display (
C
, see
Fig. 1
) shows
the set speed.
The stirrer has two different speed ranges:
Range I:
low speed, high torque.
Range II:
high speed, low torque.
•
Correct procedure for changing the speed range:
- Switch the device off at the rotary knob (
B
, see
Fig. 1
).
- Switch the speed range with button (
K
, see
Fig. 1
).
- Change the speed with the rotary knob (
B
, see
Fig. 1
).
- Switch the device on at the rotary knob (
B
, see
Fig. 1
).
- The speed can be varied at any time in operation.
- The speed appears in the display (
C
, see
Fig. 1
).
