8
Fig. 7
Drain valve
Drain port
Fig. 8
Low level
High level
Note:
Pay attention to the fluid level information!:
- To drain the fluid from the bath, connect a hose to the
drain port and turn the drain valve in counter clockwise
direction with a straight screwdriver�
- Check and make sure that the drain valve is closed (Ro-
tate clockwise to the stop position, see Fig� 7)�
Note:
Please note information in chapter “Commissioning”�
- Connect the mains plug and turn on the device with
mains switch (6)�
- The low level warning message appear on the display�
- Open the lid (2) and fill fluid to the bath�
• Filling and draining:
- Before filling the fluid into the bath, open the front cover
as indicated in following figure�
Fig. 6
Warning:
do not empty the bath while it is still hot/cold,
there is a risk of burning/freezing�
