IKA CBC 5 basic Operating Instructions Manual Download Page 17

17

USB 2�0 cable A - Micro B:

 This cable is required to connect USB interface (

12

) to a PC�

USB micro B

USB A

A

Fig. 15

Maintenance and cleaning

To avoid contamination, it is essential to change the bath 
fluid from time to time�
If water is used for bath fluid, we recommend to add Wa-
ter bath protective media�

 

The protective media stops the 

growth of algae, bacteria and other microorganisms with 
its bactericidal effectiveness� It protects the bath fluid and 
provides a long period of use for the fluid�

To keep the full cooling performance, the dust filter of the 
cooler must be checked regularly and cleaned if necessary�
• Switch off the device and disconnect mains cable�
• Open the front venting grid (5)� 
• Remove the bracket�
• Clean condenser dust protection sheet with a vacuum 

cleaner or wash the sheet in the water and dry the sheet 
before assembly�

Note: 

Don’t touch the condenser surface with hard parts� 

Cleaning:

Disconnect main plug prior to 
cleaning!

Use only cleaning agents which have been approved by 

IKA

®

 to clean the device� 

Dirt

Cleaning agent

Dye

Isopropyl alcohol

Construction material  

Water containing tenside/ 
isopropyl alcohol

Cosmetics

Water containing tenside/ 
isopropyl alcohol

isopropyl alcohol

Water containing tenside

Foodstuff

Water containing tenside

Fuel

Water containing tenside

For materials which are not listed, please request in-

formation from IKA

®

 application support�

Wear protective gloves while cleaning the devices�
Electrical devices may not be placed in the cleansing agent 
for the purpose of cleaning�
Do not allow moisture to get into the device when cleaning�
If a different cleaning or decontamination method than the 
method defined by 

IKA

®

 is planned, the user must ascertain 

with 

IKA

®

 that this method does not damage the device�

Spare parts order:

When ordering spare parts, please give:
-  machine type
-  manufacturing number, see type plate
- item and designation of the spare parts, see 

www�ika�com

- software version�

Repair:

Please send in device for repair only after it has been 

cleaned and is free from any materials which may 

constitute a health hazard�

For repair, please request the “Decontamination Clearance 
Certificate” from  

IKA

®

, or download printout of it from the 

IKA

®

 website 

www�ika�com

If you require servicing, return the device in its original pack-
aging� Storage packaging is not sufficient� Please also use 
suitable transport packaging�

Summary of Contents for CBC 5 basic























Reviews: