IKA C 6000 global standards, Operating Instructions Manual, Page: 19 / 64

19
Input of a numerical value, such as weight-
ed sample:
The entire area with the exception of the „Scale“
button is available to be clicked here. A numerical
virtual keyboard is opened and can be used to
input the value:
After the virtual keyboard has been closed with
„OK“, the value in the input field is loaded. Alter-
natively, clicking on the „Scale“ button automati-
cally loads a value from a connected balance.
Input of an alphanumeric value, such as
„Designation“ :
Here again the entire area is available to be clicked.
A complete virtual keyboard is opened.
Note: The maximum input is 23 characters.
After the virtual keyboard has been closed with
„OK“, the value in the input field is loaded.
Select from a selection box, e.g. for the ig-
nition aid:
After the selection box has been clicked, a list of
the options is displayed. The option that is clicked
is selected.
Single selection field, such as calibration :
Clicking on the entire area allows the prepared
measurement to be marked as a calibration.
Selection box
Weighted sample
Shift key for upper and lower case
letters and special characters