Spare sensor (unopened)
After one year
使用中センサー
Warranty term
Service life
Service
life
保証期限のお知らせ
30 days
One year
If the sensor fails in 8 months
Approx. 4 months
One year
Spare sensor (unopened)
Replace with new sensor
Replace with
new sensor
Original warranty term
One year
One year
After two years
Sensor package opened
Notice of warranty term
(Recommended to prepare sensor)
Equals remaining warranty term
Malfunction replacement
One year
Sensor package opened
Sensor package opened
Sensor package opened
Quick Sampler
(Model: PO-1)
Eliminates the need to attach adhesive
rubber or pierce needle through
adhesive rubber.
Quick Sampler 2
(Model: PO-2)
Suitable when the top of the sample is
indented, such as with a cup.
Printer (printer cable sold separately)
(Model: CBM-910II-40)
Use to print out the measured
values.
-
Ordering consumable parts
Printer paper (Model: RP5860) 20-roll set
Ink ribbon (Model: IR91B) 5 ribbon set
Gas sampling glass tube
(Model: GS-2)
Use this tube to collect small amounts of
sample gas from the container, such as a
can, bottle, or ampule.
Can opener
(Model: KO-1)
Use this opener to measure the remaining
oxygen concentration in a can.
Opener
(Model: KO-X1)
Use this opener to measure the remaining
oxygen concentration in a bottle.
Storage case
(Model: ROPSC1)
Storage case dedicated for the RO-105
series.
PACK LEADER x 1 unit
Main unit
Sampling adapter
Oxygen sensor (WAGNIT
®
) x 1 unit
(Model: WA-SGF2)
Already mounted in the main unit housing.
AC adapter x 1 unit
(Model: AC-105)
Needle (vertical slot type) x 2 pcs.
Needle (horizontal slot type) x 1 pc.
Switch the type when measuring a sample, such as
an adhesive, that can easily clog the needle.
Adhesive rubber x 20 pcs.
Size: 20mm x 100mm x t1
Maintenance kit
(model: MK-105)
Membrane filter x 3 pcs.
Check valve x 1 pc.
Sampling tube with fitting
(length: 50cm) x 3 pcs.
O-ring for housing x 1 pc.
AA alkaline batteries x 4 pcs.
Already mounted in the main unit.
Operation manual and
warranty (this document) x 1 copy
Handy User’s Guide x 1 copy
Oxygen sensor warranty x 1 copy
Before starting use
2.
Confirmationofpackagecontents
When unpacking the PACK LEADER, confirm that the following items are included and that the contents have
not been damaged. If any parts are missing or damaged, contact the dealer from which you purchased the
product.
Package contents
“WAGNIT
®
” is a registered trademark of the Iijima Electronics Corporation oxygen sensor.
Accessories (options)
Output 6 VDC
* Refer to the instructions enclosed with each product for details on handling.
