8
GETTING STARTED
SETTING THE BASE STATION
CHARGING THE
WET
VAC
1:
Plug the power adapter into a functioning wall outlet.
2:
Connect the plug directly into power jack at the back of the Base Station and place the vacuum onto
the Base Station as shown above.
3:
When properly docked the digital display will show the current battery charge percentage.
1:
Slide the accessory storage part onto the Base Station as shown above.
NOTE:
Before first use, the battery may require up to 5 hours to fully charge. While charging, vacuum
enters standby mode. Remove from charging to operate.
1
3
1
2
Summary of Contents for iHWV5
Page 2: ......
