13
CLEANING AND MAINTENANCE
1
2
3
4
5
5
1:
Release the lock button on the roller brush guard and pull up.
2:
Open the brush guard and remove it as shown above.
3:
Pull the brush out as shown below and pull up away from the vacuum.
4:
Thoroughly clean the Roller Brush and Brush Guard. Use a mild detergent if necessary. Clean the crevices
of the vacuum housing and main inlet with the cleaning tool provided.
5:
Re-assemble in reverse order. Align the tabs of the brush guard with the vacuum to properly as shown
below. Push down until the brush guard clicks into place. Inspect the sides to ensure fitment is tight on
both sides.
ROLLER BRUSH CLEANING
Summary of Contents for iHWV5
Page 2: ......
