9
FILLING THE CLEAN WATER TANK
USING YOUR
WET
VAC
1
2
1:
Remove the Clean Water Tank from the vacuum by pushing down on the tank release and pulling the
tank away from the vacuum as shown.
2:
Open the latch on the tank as shown above.
3:
Fill with tap water and then tightly close the tank latch as shown above.
(Do not use water above 120˚F)
4:
Tightly close the tank latch as shown above.
5:
Install the Clean Water Tank back into the main unit.
3
4
5
Summary of Contents for iHWV5
Page 2: ......
