2 INSTRUCTIONS
FOR
USE
MINIDUMPER
CARRY 107
22
2.8.6
INSTRUCTIONS FOR LINK-UP CONCRETE MIXER KIT, BY USING LIFTING JACK.
LOWER THE BOOM FRAME UNTIL
THE PINS ARE POSITIONED
ON THE SPECIAL RESTS "A".
CAREFULLY APPROACH THE
GANTRY KEEPING CENTRED
UNTIL THE FRONT PIN
RESTS ON THE
STRUCTURE.
MOVE BACKWARDS SLOWLY
RELEASING THE BOOM FRAME
FROM THE ACCESSORY AND
THE MINIDUMPER FROM THE GANTRY.
8
7
INSERT THE RESTING
PINS AND LOCK
THEM TURNING 90°.
MOVE FORWARDS SLOWLY LIFTING THE BOOM FRAME AT
THE SAME TIME TO TAKE THE
PINS ABOVE THE
SPECIAL RESTS.
5
6
3
1
4
2
RAISE THE SHOVEL TO THE
END OF ITS STROKE.
LOWER THE
ACCESSORY
COMPLETELY.
RELEASE THE
CLAMPING
SYSTEM.
A
DISCONNECT THE FLUID POWER
PIPES THROUGH THE SPECIAL
QUICK COUPLINGS, REMOVE THE
CONTROL PANEL TAKING OFF
THE TWO LOCKING KNOBS "A".
POSITION THE
CONTROL PANEL ON
THE ACCESSORY
FRAME.
RAISE THE ACCESSORY, RELEASE THE TWO PIPE
STOPPER BRACKETS FROM THE MACHINE
FRAME AND LOWER THE ACCESSORY.
A
