2 INSTRUCTIONS
FOR
USE
MINIDUMPER
CARRY 107
6
CURVE ON THE LEFT
LEVER "B"
Steering
forwards
Steering
backwards
CURVE ON THE RIGHT
Steering
forwards
Steering
backwards
LEVER "A"
SPOT LEFT TURN
Forwards
Backwards
LEVER "B"
LEVER "A"
SPOT RIGHT TURN
LEVER "B"
LEVER "A"
Forwards
Backwards
•
L
OWER THE ENGINE SPEED
.
•
D
O NOT CHANGE THE TRAVEL SPEED WHEN DRIVING
DOWNHILL
.
•
W
HEN DRIVING ON SLOPING GROUND
,
MAKE SURE THAT
THE TRACKS ARE IN LINE WITH THE SLOPE AND NOT
ACROSS IT
.
•
N
EVER DRIVE ACROSS A SLOPE
.
•
A
VOID STEERING ON SLOPES AS THIS CAN RESULT IN
SKIDDING OR TIPPING OVER
.
•
W
HEN DRIVING ON SLOPES
,
KEEP THE SHOVEL AS
CLOSE TO THE GROUND AS POSSIBLE
(
IF FITTED
).
WARNING
2.1.1
MACHINE TRAVEL (Levers A and B)
1. Move the lever of number’s setting of engine revolutions in the desired position.
2. Check right and left travel levers as follows:
STRAIGHT TRAVEL.
-
Forward travel
Push both levers forwards. The machine will move towards the front (dumper
end).
-
STOP
Release the levers to stop the machine.
-
Backward travel.
Pull both levers backwards. The machine will move towards the rear (operator end).
CORNERING.
When cornering use the two levers as follows..
- Left turn
Push the right lever (1)
forwards to travel
forward and left, pull the
right lever towards you
to reverse and turn left.
- Right turn
Push the left lever (2)
forwards to travel
forward and right, pull
the left lever towards
you to reverse and turn
right.
SPOT TURN
.
- Spot left turn
Push the right lever “B”
forwards and at the
same time pull the left
lever “A” backwards.
This operation causes a
quick left turn.
- Spot right turn
Push the left lever “B”
forwards and at the
same time pull the right
lever “A” backwards.
This operation causes
a quick right turn.
DRIVING ON SLOPING GROUND.
LEVE DI TRASFERIMENTO (DX e SX)
LEVA "B"
LEVA "A"
Trasferimento
in avanti
Trasferimento
indietro
Driving on slopes
