MBG Enclosure:
The model is as shown to the left. The
stainless-steel cabinet that houses pumps,
electricals and controls is a rectangular box
type product with opening front doors. These
doors are opened to start/stop the operation of
the unit and to adjust for correct pressure.
Both sides of the enclosure have vents
positioned and the rear of the enclosure is
mainly a single sheet with cut outs at the
bottom to access plumbing. The base is open.
The unit is designed to operate in such a way
as to allow ventilation of heat out of the
enclosure and be able to successfully operate
outside in all weathers.
The product requires mechanical lifting equipment to place into position or shift
from one position to another. It is feasible to bolt the frame to a specifically
sized pallet to allow easy movement by forklift.
The unit shown above has protective coverings on the outside and the unit that
you receive may have some of this protection or it may be removed. Your unit
will have a IGS Water signage on it with contact phone numbers and web
details.
How to connect the delivery hose:
Note:
It is recommended that the delivery hose is connected to the correct
fitting on the side of the unit prior to connecting the suction hose.
This is to allow easy tightening of the delivery hose without risk of damage to
the suction hose.
