16
Connecting a TV and Player
Read the operating instructions of the connected equipment together with these instructions.
Before connecting external equipment, be sure to turn them off and unplug the power cord of the equipment. When
you wish to add any equipment, turn off and unplug the IGO Audio HOME THEATRE RACK SYSTEM as well as the
equipment being installed before proceeding.
Connect the power cord of each piece of equipment only after all the connections have been completed.
Connecting equipment with an HDMI jack (TV, DVD/BD player, etc.)
Connect a HDMI CEC compatible TV with a player as described below. You can operate HDMI CEC compatible TVs
and players using the TV and other remote control via the unit’s link function.
Cables to be used
Cables to be used
HDMI cable
Use the supplied HDMI cable or a commercially-available cable with the HDMI (
) logo. Use a high-speed HDMI cable to
input a 1080p video signal from external equipment (the signal may not be input properly with a standard HDMI cable).
Optical cable
Connect the optical cable as well as an HDMI cable to listen to the sound from a non ARC (Audio Return Channel) compatible TV.
You cannot listen to the TV sound with this unit via an HDMI cable only. Check the jack type of the connected equipment before
purchasing additional cable.
The type of the plug to be connected to the unit is
.
Amplifier connections
Amplifier connections
Connect to one of the
HDMI IN 1 to 3 jacks.
Signal
Signal
HDMI cable (not supplied)
HDMI cable (supplied)
To HDMI OUT
To HDMI
OUT
To HDMI
IN
with an HDMI output jack -
HDMI CEC compatible
Player
TV
with an HDMI output jack -
HDMI CEC compatible
To Optical Digital
Audio OUT
To Optical Digital
Audio IN (TV)
Optical cable (supplied)
Connect the optical cable together with an HDMI cable to listen to the
sound of a
non ARC compatible TV
. You cannot listen to the TV audio
with this unit via an HDMI cable only.
The optical digital audio input jack is
covered. Just insert the plug into the
covered jack after making sure it is
pointing the correct way.
Connect to the Digital Audio IN
(TV).
For connections via an HDMI cable or optical cable
For connections via an HDMI cable or optical cable
Set the digital audio output setting on the connected equipment (such as a TV) to “Auto” or “Bitstream”, etc. Refer to the operating
instructions of the connected equipment for setting method.
• The optical cable may be damaged if it is bent excessively.
About the HDMI PASS-THRU function
• You can listen to the sound of the equipment connected to the unit via the TV speakers even if the unit is in standby mode. If the priority speaker
setting on the TV is set to “AV System” or “Theatre System”, etc., the sound is automatically output from the speakers of the unit when the unit is
turned on.
HAV-R400G_R500G.indb 16
HAV-R400G_R500G.indb 16
11/10/2011 9:31:26 AM
11/10/2011 9:31:26 AM