15
Installation
Preventing the TV from falling or toppling
Preventing the TV from falling or toppling
The effectiveness of falling and toppling prevention may decrease significantly depending on the strength of the wall or platform on
which the fall or topple-prevention device is installed. Be sure to provide appropriate reinforcement. The falling and toppling
prevention methods outlined below are intended to reduce the risks such as injuries only, and not to guarantee that these methods
will be effective in all cases.
The unit may fall backwards. After securing the TV, bring the unit closer to the wall so that the unit will not fall backwards.
Infants and children may be injured if allowed behind the unit. Bring the unit closer to the wall so that infants and children cannot go
behind the unit.
The measures described below are only an example of the preventive methods. Other measures should be taken according to the
operating instructions supplied with your TV.
The illustration is an example only. The actual form of the equipment/device differs depending on the connected TV.
Securing the unit and TV stand with topple-prevention belt
Securing the unit and TV stand with topple-prevention belt
Bring the topple-prevention belt located at the bottom of the TV stand to the rear, and use the locking screw (supplied) to securely
fasten it to the topple-prevention screw hole on the back of the unit.
Secure the unit and TV with Topple-prevention
belt (not supplied) and screw M4 × 16 (supplied)
Topple-prevention screw hole
Topple-prevention belt (not supplied)
Stand
TV stand screw (not supplied)
• The TV stand screw and topple-prevention belt are not supplied in this package. For details, please refer to your TV’s User Guide.
Connecting the Audio Player
Cables to be used
Cables to be used
Pin cable (not supplied)
White
Red
White
Red
Pin cable (not supplied)
White
Red
Mini plug
Refer to the operating instructions of each equipment to connect equipment.
When using Audio Player
Amplifier connections
Amplifier connections
Audio Player etc.
To Audio IN
To Audio OUT
Signal
Signal
To Analog Audio OUT
White
Red
White
Red
CD Player
White
Red
• The sound volume may be lower if an audio cable with a built-in resistor is used.
• When the unit is connected to a TV or player with an audio cable, use the remote control of the connected equipment to change the sound
setting for sound multiplex broadcasting programs.
HAV-R400G_R500G.indb 15
HAV-R400G_R500G.indb 15
11/10/2011 9:31:25 AM
11/10/2011 9:31:25 AM