en
13
User manual Kasia GRZ
www.igloo.pl
5. MAINTENANCE
5.1. Cleaning and maintenance
It is recommended to make a break in the exploitation of the device once a week in order to clean its interior.
Remove the dirty water from the tank by opening the water out
fl
ow ball valve placed below the body of the device
Fig.1/11 (p.9).
All maintenance services need to be performed after disconnecting the device from power supply!
Protect electric installation against any damage or water spillage
Do not use water stream to clean the device, only a wet cloth
Do not use any sharp objects to remove dirt!
Devices with wheels cannot be used on uneven surfaces!
During cleaning the inside of the device do not leave the front glass freely lifted in the aluminium pro
fi
le. This
may cause the damage of the glass and is not covered by warranty. Please remove the glass with pro
fi
le for
the time of cleaning Fig.10 (p.13)
Fig.10 Front glass disassembly
1- Front glass
2- Upper aluminium pro
fi
le (lifted guide) of the glass
3- Lower aluminium pro
fi
le (catch) of the glass
4.2. Temperature regulation
Bain-marie is equipped with mechanical temperature regulator. Temperature sensor is located in the bain-marie tank. We
set the desired water temperature in the tank Fig.8/3 (p.11) with the help of regulating knob by turning it and setting in proper
position. Turning the knob clockwise increases the set temperature, and turning it in the opposite direction causes the de-
crease of temperature. Turning the knob left, until it reaches the
fi
nal position turns off the heaters, despite the fact that
the
power supply is activated
.
Fig.11 Changing the
fl
uorescent lamp
1 – Fluorescent lamp handle
2 – Fluorescent lamp
3 – Casing of
fl
uorescent lamp and
starting switch
4 – Starting switch of
fl
uorescent lamp
During maintenance services it is necessary to pay attention not to damage the data place of the
device Fig.12 (p.14), which contains signi
fi
cant information for servicing organs and waste removal
companies.
Elements of device can corrode when improper used and maintenance. To avoid that please
follow the rules:
• Do not allow contact of the surface of the device with substances containing chlorine and / or baking
soda in different varieties, which destroy the protective layer and components of the device (also
includes various stainless steel)
3
4
2
1
1
2 3
