Doc Ref: SL-068 v1.35 pg 16
Reset to Defaults
If required the module can be reset back to a default state. The diagram below indicates the
sequence to do this.
UP
UP
UP
UP
DOWN
DOWN
DOWN
DOWN
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
With the module powered the LED
pattern indicates that the PEllistor,
I/O Port 1 and the Relay are
activated
When reset the default For software
versions 2.5 and earlier will be
Pellistor input only for a MK6/7
Pellistor with a default address of 1.
Only the first LED should be lit.
Software versions after 2.5 will
default to having no set IO
functions.
If correctly reset the LED’s will each
cycle on and off in turn
Press and hold both
buttons for more than 5
seconds, Note all LED’s
will turn off, then release
the button.
