IGBT MIG-200M, User Manual

Page: 14 / 21

13
Settings
The brightness of the display can be adjusted within the settings option.
The user interface software settings can be reset to the original factory settings.
Please note that all the saved data will be reset to factory setting.
Information regarding the software revision of the user interface and the software
revision of the inverter board is present in the information section.
The language version of the text present in the user interface software.
The units of measure can be chosen by the user. The units can be selected as metric
or English.
AVAILABLE EQUIPMENT OPTIONS
When using spool gun, please select the torch switch at “Spool Gun” in the internal
panel. The spool gun is recommended for aluminum welding.
Scratching TIG option. Please use the TIG torch with scratching arc start.
To use foot pedal under TIG, please connect it to the machine before usage.
7. CAUTION
1. Working Environment
(1) Welding should be carried out in dry environment with its humidity of 90% or less.
(2) The temperature of the working environment should be between -1
0 ℃
to 40
℃
.
(3) Avoid welding in the open air unless sheltered from sunlight and rain. Keep it dry anytime
and do not place it on wet ground or in puddles.
(4) Avoid welding in dusty area or environment with corrosive chemical gas.
(5) Gas shielded arc welding should be operated in environment without strong airflow.